The Portaspec X-ray Spectrograph is a very accurate, lightweight and portable instrument.
Its design enables the use of x-ray analysis for such varied applications as on-site assaying and in-plant bulk material identification --
without cutting samples. This versatile analyzer can be used either in the field, or as a complete laboratory system with its multi-element sequential
analysis capabilities.
The Portaspec can be applied to odd shapes such as castings, tubing, bars, and sheets that normally cannot fit into sample compartments.
It can analyze powders and liquids with the appropriate optional holders.
The Portaspec is operated by a PC Touchscreen Notebook Computer, complete with Windows®-based preinstalled Software.
Easy to operate, Portapec provides fast on-the-spot, non-destructive elemental
analysis and can be adapted to special on-line applications.
SPECIAL ORDER - Call for details

| Technical Data |
| Bragg Angle Range |
13 to 98 degrees; two theta |
| Analyzing Crystal |
Lithium Fluoride (200) |
| Element Range Ka |
22-47 (Ti to Ag) |
| Element Range La |
56-92 (Ba to U) |
| Collimators |
20 mil Divergent (Source)
10 mil Receiving (Exit) |
| X-ray Source |
X-Ray Tube, Tungsten Target, Beryllium Window |
| X-ray Tube Voltage |
30 kV Constant Potential |
| X-ray Tube Voltage Regulation |
plus/minus 1% for plus/minus 10% line voltage variation |
| X-ray Tube Current |
0 to 5 mA - Adjustable |
| Detector |
Sealed Proportional |
| Detector Supply |
0-2700 VDC Max (adjustable) |
| Digital Scaler and Timer |
Counting Range: 1 to 999,999
Timer Range: 1 to 990 seconds |
| Lamps |
X-ray On |
| Supply Requirements |
115 Volts, 60 Hz, 300 Watts |
| Optional |
230 Volts, Single Phase, 50 Hz
Two-Position Sample Holder |
| Dimensions and Weight |
Power Supply: 18" Long, 14" Wide, 13" High, 59 lbs.
Probe Head: 12" Long, 3-1/2" Wide, 9" High, 14 lbs.
|
Included Items:
|
Electric Water Cooler and Circulator
Windows®-based Touch-screen Notebook Computer
PC Interface and Preinstalled Software |
|